Checkout the New Velocity Probes!

	Velocity Probes come in ~.600" and ~.500" bend and 18" standard length (other lengths available). Unique design allows the tubing to exit out the back so the probe is easier to handle while performing multiple tests on a port. Also comes in a straight probe for exhaust work which can be custom bent if required. Price for .600" bend is $100 Price for .500" bend is $100 (complete one shown in picture) Price for straight probe is $100 (no additional charge for custom bending)
	Custom machined averaging pitot tubes now come with 10-32 compression fittings Machined for 3", 2" and 1.5" Standard PVC schedule 40 pipe (custom sizes available upon request). Installation is as easy as drilling and tapping a 10-32 thread. Price per averaging pitot tube is: $25.00 each. Price for the static pickup barb fitting is: $10.00 each
	Custom Flow Elements using our averaging pitot tube assemblies. Elements can be made to any length. Standard dia is 2" Email for prices
Custom	Sharp Edge (not square edge) Orifice Plates Manufactured from 1/8" thick aluminum. They can be used for an orifice style flowbench or a calibration plate for your own style of flowbench. Price of basic plate 6" x 6" is $30.00 (CFM of your choice) You can also purchase a set machined to match the famous "Pass-Around_Plates" (PAP) discussed on the Flowbench Forum. These plates are machined to the same dimensions and flow compared to the original set. Any deviation will be noted on the plate. You can then use these plates to compare your bench readings to the readings of the forum members who flowed the original set of PAP's. Price for a set of 3 PAP copies are $90 Sharp edge orifices custom machined to your specs. Price based on design, email me for more info.
	Honeycomb flow straightener adaptable to standard 2" PVC pipe. No price yet, not in production. Email for more info

Payments can be made via Paypal (preferred) Cash, or Check please contact me for payment instructions