Signed up for the new forum

[Tom Vaught]

Anyone still using the old forum except for reference?

Tom Vaught

[Brucepts]

What took you so long??? LOL

The old forum is going to become reference/read-only as soon as I figureout how best to do it.

Prefer to have any new posts/replies started here.

[Flash]

Thought it was set to read only............when over there and noticed there was a couple posts.

[Flash]

What took you so long??? LOL

The old forum is going to become reference/read-only as soon as I figureout how best to do it.

Prefer to have any new posts/replies started here.

Maybe when you change it to read only, you can add a message to whom ever trys to post up, This address and an explanation of how to get here and re sign up.

[S.Brown]

Anyone still using the old forum except for reference?

Tom Vaught

This wouldn't happen to be the Tom Vaught from Westland Michigan, would it?
I believe it was Oakwood Lane, back in the day?

[putlove]

Im new to this forum today. I was reading about the orfice plate that was sent to other flowbench owners. Could i buy a set of those plates to check my machine? I have a 17 inch stainless disc turn around in my machine im building right now. I had merriam instruments help me with calibration. They sent me a full print out for all the flow ranges i wanted. I would really like to compare my numbers with you guys when its running. Thanks,jim

[Brucepts]

Im new to this forum today. I was reading about the orfice plate that was sent to other flowbench owners. Could i buy a set of those plates to check my machine? I have a 17 inch stainless disc turn around in my machine im building right now. I had merriam instruments help me with calibration. They sent me a full print out for all the flow ranges i wanted. I would really like to compare my numbers with you guys when its running. Thanks,jim

Welcome to the forum! You can find parts here:

http://www.flowbenchtech.com/flowbenchparts.html