Yup . . . $45 per plate is rentalSuperdave wrote: I should be getting payment soon for a set of heads, maybe i'll just buy a set from the store here. Do you happen to have a rent option? lol...
Formula help?
-
Brucepts
- Site Admin
- Posts: 1861
- Joined: Fri Jan 08, 2010 3:35 pm
- Location: Pennsylvania
- Contact:
Re: Formula help?
Bruce
Who . . . me? I stayed at a Holiday in Express . . .
Who . . . me? I stayed at a Holiday in Express . . .
-
Brucepts
- Site Admin
- Posts: 1861
- Joined: Fri Jan 08, 2010 3:35 pm
- Location: Pennsylvania
- Contact:
Re: Formula help?
PM replied to . . .
BTW plates are $30 each so it's a better deal to buy plates
BTW plates are $30 each so it's a better deal to buy plates
Bruce
Who . . . me? I stayed at a Holiday in Express . . .
Who . . . me? I stayed at a Holiday in Express . . .
-
Superdave
- Posts: 16
- Joined: Sun Nov 04, 2012 7:13 pm
Re: Formula help?
Just a quick update, I've actually made quite a bit of progress in the last few days. I put lots more time into the code, along with installing the 24x2 LCD.
Still not correcting for temperature, sensor is on the way. Ended up averaging the values on all 3 inputs to get a smoother result. CFM actually stays steady on the screen and i'm getting some repeatable results on the bench.
Here is the current code if anyone wants to take a look, if you see any mistakes feel free to point them out.
http://www.sdsgarage.com/Misc/Projects/ ... ench13.ino
I still plan on using the raw A-D to do the pressure corrections eventually as suggested, might do that tomorrow night if possible. Calibration plates will probably have to wait till after xmas.
Later,
Dave
Still not correcting for temperature, sensor is on the way. Ended up averaging the values on all 3 inputs to get a smoother result. CFM actually stays steady on the screen and i'm getting some repeatable results on the bench.
Here is the current code if anyone wants to take a look, if you see any mistakes feel free to point them out.
http://www.sdsgarage.com/Misc/Projects/ ... ench13.ino
I still plan on using the raw A-D to do the pressure corrections eventually as suggested, might do that tomorrow night if possible. Calibration plates will probably have to wait till after xmas.
Later,
Dave