PTS Flowbench Forum

vuurmuur wrote:Psst, that other member is me Bruce.

People contact me via emails, phone, PM's and sometimes it's hard to put a user name with the person I am talking with. Sorry

It's really tough when they are using them all at the same time to keep the conversations correct especially when you have 5-10 people a week asking similar questions.

And then you have those who use different email addresses for forum registry than the one they contact you with

Hello All,
To make sure nobody has to search for a good 230v motor like i did:
I've ordered motors from Domel. An European manufacturer from Slovenia.
They were very helpful and together we found a good motor. First i wanted the 467.3.234 motor but this one is out of production.
Now i've got the 496.3.703-2 motor. I've made an comparison table in excel to compare the different motors to each other and to see witch motor had best efficiency @ 44" test pressure.
As you can see it is a quite conventional motor with good performance. The motor has ~100CFM @44"H2o and draws 1330w of power. The price is good to, around 55 euro's each.
So if someone from Europe wants a good motor look at http://www.Domel.com or contact me for an email address.