Another consideration to think about Ron, If you use 12 of the LH2093-240, your total flow in a bench with a 16" rise would be only be 100-120 cfm @ 100".
Jim
Average flow loss
-
RACEPUMPER
- Posts: 447
- Joined: Wed Aug 25, 2010 7:54 am
- Location: Riverina Australia
Re: Average flow loss
I really love making stuff but don't finish much
-
ronm
- Posts: 78
- Joined: Fri Aug 26, 2016 7:08 pm
Re: Average flow loss
My posts don't always work. I will probably never test over 44" but I will be using some steel bracing in certain locations. Working on the slider assembly and motor mounts and motor plate.