PTS Flowbench Forum

1960FL wrote:Ok Ok I hear you Bruce

Rick

vic_dahn wrote:I have been on the run around with them this summer!

I am well versed in their products I may be able to help.

I also had to send mine back this summer and have them fix the fp-1 out of spite I took a picture of the inside of the box. I would say open that sucker up and see if any of the breadboard connections has came loose. nice huh!

I use a FP-2.0 tube and a FP-1 processor

http://www.flowperformance.com/docs.html

also if you notice that they scratched off the number on the big chip. if your has #'s please let me know so I can reverse engineer it and sell the one that I currently use. J/k