larrycavan wrote:Chad Speier wrote:I'd love to see that debate. I'd like to sit back and take it all in. However, I just want to know what I'm seeing is right. I want to know what I'm doing is proper. Having two quality bench options and seeing different results puts a dark cloud over things.
I do know, and it sucks, is owning a big blue gives you instant credibility in some circles. That part I HATE. However, it is what it is..
What I would really like to see is software for the PTSDM much like how you use Performance Trends. Have a section you can enter already calibrated factors (not cd's), able to change the range with a click (range 1-6), and see how it compares to the PTS bench. I think the SF bench is inadequate to use one single orifice for flow testing.
I could make that happen with FSE. A drop list with your preset orifice specs could be added. It would be more than just their flow rate though because of the way the coding works to pull the config file to setup the formulas for flow. HOWEVER, I've decided to stop further development on FSE for two reasons.
1 - Zero feedback from end users
2 - I read that Rick has something in the works for an updated version of Flow Soft Basic.
With regard to the situation you've gotten yourself drug into with some of your customers........ That's just a bitch no matter how you look at it. People are people. I think you've addressed with situation with the purchase of the blue bench. If that's what they want to believe, then fine. You're covering that base for those particular people.
Don't misunderstand me Chad. I get where you're coming from. But also don't loose sight of the fact that what you're doing works!
Like I stated before. Each bench is telling you what the flow conditions are inside their own chamber. Neither duplicate the engine exactly. If it were me, I'd leave the blue bench as is and work the PTS unit for as much DP as you can make it pull. Believe what it's telling you and carry on with your porting development. What you need now is time to build more flow bench data along with more customer results data. Over time, armed with that information, you're going to go another mile down the road with your advancements.
I think you're aggravating yourself because you lost site of one simple fact.... YOU don't follow the crowd! You're strong on your opinions. Some people might not understand that type of personality. Oh Well.... It's people with those characteristics that break new ground!! Just keep doing what you're doing. It won't always make sense. It won't always be easy to justify to everyone you talk to. Some will roll their eyes..... Just let them and keep going forward..... It's dam frustrating sometimes when you're trying to figure out how something you cannot see is actually behaving.... I have wondered what a transparent front panel with some threads taped at various locations inside the benches top chamber might quickly show us.....
JMO
Larry C
Larry, here's the problem with that line of thinking if you sell port work.
If a foot is 12 inches but the Big Blue machine says a foot is 13 inches then everyone has to be get on board and say a foot is 13 inches!
Is Big Blue right. Hell no! But there's a problem... Big Blue beat everyone else to the market and set a foot at 13 inches.
So if you come out and port and get big time numbers that don't replicate on a Big Blue machine, what are you? A liar who inflates numbers.
Is this the truth? No. Big Blue is messed up, but it doesn't matter because they beat everyone else to the market (by about 5000 benches), so by default they are the "default". Right or wrong, this is reality. Prove to me I'm wrong. Ask 100 hot rod enthusiasts who might have port work done which bench they want their stuff flowed on. I bet the answer 99% of the time is SuperFlow.
It's a brand name. Like it or not, it's a brand name.
I don't sell port work (not more than 1 port job every six months) so I have no dog in this fight, so when you go to crush me just keep that in mind... but I think I have a good idea of what the customer wants because I used to be that customer.
I only bought a Big Blue bench (twice) because I wanted to see how my port work compares to other port work I've seen flowed on other Big Blues.
I will be the first to say that some of the numbers that I've seen on home made benches I could NEVER see on my bench with the same CSA and short turn work. Those number are so high that I could never achieve them with a Big Blue bench so I automatically discount them to a certain degree. And it's not beause I don't know how to shape the short turn or widen the area over the turn or use the pitot to make sure it's not too fast over the turn. It's because a foot is 12 inches on those machines and it's 13 inches on a SF machine.
It's the same for the AFR, TEA, and other heads on my SF machines. They flow close to what the advertised numbers are... but are no where close to what some of the home made benches say, so how can you compare?
I'm not saying the small company heads don't make more power. Quite the contrary, the work I've seen here is quite amazing and I hope the trickle down gets to the end user sooner rather than later but if you're comparing numbers to numbers it's no comparison.
320+ cfm from a 195cc SBF Twisted Wedge head??? Really??? You have a company (TEA) dedicated to making the TFS TW head better and the best they can get is 315 cfm at 206 cc and 120 cfm/sq inch of area but someone can take a box stock TW head and make it move 128 cfm/sq inch of area???
See the point I'm trying to make? If it's too good to be true, it's probably too good to be true.
Again, not trying to piss anyone off so please take the above with an open mindset.
