What kind of Flowbench accidents have you had or heard of?jfholm wrote: Be careful with higher pressures and don't let anybody come along and put their hand over the port when you have it at max flow and pressure. The results could be disastrous.
John
Flowbench accidents
-
SSR
- Posts: 155
- Joined: Sat Feb 27, 2010 4:56 pm
- Contact:
Flowbench accidents
Out of idle curiosity and triggered by this:
Hello stalker!
-
jfholm
- Posts: 1628
- Joined: Fri Feb 19, 2010 7:36 pm
- Location: Grantsville, Utah 45 min west of Salt Lake City
Re: Flowbench accidents
If you are doing an intake it could implode your bench. Doing and exhaust could cause and explosion. I have seen internal panel separations and cracks which can be horrible to repair. Best one I have heard about is the guy who vented his bench to the outside but still sucked air from his room. I caused such a pressure differential it pulled drywall loose off the walls.
John
John