Finally works
Posted: Wed Apr 15, 2015 1:18 pm
I got my orifice bench up and running. I have a friend with a calibration plate that is calibrated for 28".
Is there an accurate way to calibrate my machine at 14" or 16" using that? How do I work the conversion?
Any other suggestions on how I might get real cfm numbers from mine? Aside from going digital..
Is there an accurate way to calibrate my machine at 14" or 16" using that? How do I work the conversion?
Any other suggestions on how I might get real cfm numbers from mine? Aside from going digital..