PTS Automatic Depression Control (PID) remote switch?
Posted: Tue Aug 02, 2016 11:55 pm
Just had a request to change the unit mounted Auto/Manual switch to a remote flowbench console switch.
I added a jack so a remote switch could be used instead of the hard-wired switch I currently use.
Think I might add this as an option or make it standard in the future, any input from those using the PID?
If you have a PID and would like to add a remote switch in-place of the unit mounted one it is very easy to do as the circuit board has a 2 pin terminal connection where the switch makes it's connection. The switch used is a SPST style.
I'll get a picture up showing this connection.
I added a jack so a remote switch could be used instead of the hard-wired switch I currently use.
Think I might add this as an option or make it standard in the future, any input from those using the PID?
If you have a PID and would like to add a remote switch in-place of the unit mounted one it is very easy to do as the circuit board has a 2 pin terminal connection where the switch makes it's connection. The switch used is a SPST style.
I'll get a picture up showing this connection.