PTS Flowbench Forum

hello
Someone talk to sharp plate orifice,change side to intake and exhaust .
or not and need to change side for next test?

Hotz

For the gentleman who answered my question on the side of the hole card sharp, the old Forum.
Courtesy rewrite the explanation for it was lost, I better post here if possible.
Sorry I do not remember who was the gentleman!

Hotz

Hotz wrote:For the gentleman who answered my question on the side of the hole card sharp, the old Forum.
Courtesy rewrite the explanation for it was lost, I better post here if possible.
Sorry I do not remember who was the gentleman!

Hotz

Hotz,
This is a picture of the air flow direction through a sharp edged orifice. It should always flow this direction so you may have to turn the orifice upside down when doing exhaust flow.

John

Thanks Jhon
you confirmed my thoughts, these my questions these are to form ideias Diy PTS FB.
you could tell me what really happen if I used straight plates

Hotz

john. I makes clear my difficulties in understanding certain technical information for my work and folded because besides studying I have to translate. more difficulties for me.
their language and easier than, my but still can not think like you.many words are placed in inverted positions and my head still can not process this information
Because all this requires time and studing
I'm sorry to you and administrators, by asking questions that seem stupid ok!

I still use a process to translate what is more stupid than I

but I'm doing the homework

Hotz


Bruce took the measures of project












muitas palavras são colocadas em posições invertidas e minha cabeça ainda não consegue processar essas informações

john. I makes clear my difficulties in understanding certain technical information for my work and folded because besides studying I have to translate. more difficulties for me.
their language and easier than, my but still can not think like you.many words are placed in inverted positions and my head still can not process this information
Because all this requires time and studing
I'm sorry to you and administrators, by asking questions that seem stupid ok!

I still use a process to translate what is more stupid than I

but I'm doing the homework

Hotz

revised with less error

Hotz wrote:john. I makes clear my difficulties in understanding certain technical information for my work and folded because besides studying I have to translate. more difficulties for me.
their language and easier than, my but still can not think like you.many words are placed in inverted positions and my head still can not process this information
Because all this requires time and studing
I'm sorry to you and administrators, by asking questions that seem stupid ok!

I still use a process to translate what is more stupid than I

but I'm doing the homework

Hotz

revised with less error

Bruce, is there any way we could get more time before the EDIT button go's away?
I too like to proof read my post several times before i post.......................
Then i come back a hour latter, and a go...... WOW! that was kinda confusing.

The main reason for a short Edit button, is for reason we don't have here..

Just a thought.

Flash wrote:Bruce, is there any way we could get more time before the EDIT button go's away?
I too like to proof read my post several times before i post.......................
Then i come back a hour latter, and a go...... WOW! that was kinda confusing.

The main reason for a short Edit button, is for reason we don't have here..

Just a thought.

I changed it to 360 minutes to edit and 30mins to delete. As an administrator I do not have these restriction so I never gave it a thought. Thanks for bringing this to my attention

Bruce one more thing, when we address a page out of the forum. To access the closed forum of PTS.
As the old forum system, opens in another tab / page, Old forum better

Hotz

I changed it to 360 minutes to edit and 30mins to delete. As an administrator I do not have these restriction so I never gave it a thought. Thanks for bringing this to my attention

Thanks Bruce!