PTS Flowbench Forum

anyone have "out-the-box" Briggs/Stratton 5 HP Raptor Flowbench CFM Numbers ???

looking for unmodified bone-stock Flow Numbers

and any other Engine Specs and Dyno Data if possible

Larry,

Now what have you got yourself into now?


This sounds like a fun project

Rick

1960FL wrote:Larry,

Now what have you got yourself into now?


This sounds like a fun project

Rick

becareful Rick, it is one of those "if he told you he would have to kill you" projects

John

Larry,
this may help a little bit http://karting.4cycle.com/faq.php?faq=new_faq_item and I will keep searching as I know I have seen this info around.

John

here is another link http://www.briggsandstratton.com/engines-racing/?tn=1

John

1960FL wrote:Larry,

Now what have you got yourself into now?


This sounds like a fun project

Rick

Thanks John , for those Links !

Rick,
i'm working on PipeMax version 4.0 update
and when i came to checkout equation correlation with Briggs 5 HP data ,
i realized i lost all that Flowbench and Dyno data in a Hard Drive failure on previous Computer

all the Info i have left was in Raptor file included with PipeMax 3.7 , 3.6 versions

i've searched the Internet for Flow Number data ,
but i "trust" this Board's member's Flow Bench data/accuracy .... than anything else on the Internet.


i was hoping someone here had flow tested a Briggs 5 HP ??
.... i just need to double-check accuracy of my equations.

i have a couple of old friends that have small engine repair/sales service,
i guess i'll have to scrounge up a Briggs 5HP and re-flow test it

Trying to get someone I know from the karting forum to get in touch, he might have what you are looking for and he uses Pipemax if I recall correctly.

Audi Thomas makes an adapter for the Briggs for the Flow Quik. He might have a customer that could help you out.