Welcome! - Welcome
10 posts
• Page 1 of 1
by Peter Christensen » Wed Jan 21, 2004 1:58 am
Bruce, are you going to put up the old postings ?
petercc@uia.net
petercc@uia.net
- Peter Christensen
by 98-1074649673 » Wed Jan 21, 2004 7:03 pm
If anyone has any thing they would like to see added let me know this board is so easy to make changes to! I was trying to keep the board simple to use. As I get use to the new board I'll open up some of the added features such as pics in posts.
As to the old posts from the last board. I do have them all saved. They are in HTML format and each post is a file. If I can figureout a way to copy them over I will. I might just make a file like the last archive that has to be waded through. Sorry but I'm not a webguru to make this change easy
I'll sure with the vast knowledge that follows this board it will not take long to be back where we were in terms of info. I value everyones input from a beginner that has no idea of what a flowbench even is to the person who is using one everyday. We all can learn from each other! I know for myself I've learned an awful lot from others here.
As to the old posts from the last board. I do have them all saved. They are in HTML format and each post is a file. If I can figureout a way to copy them over I will. I might just make a file like the last archive that has to be waded through. Sorry but I'm not a webguru to make this change easy
I'll sure with the vast knowledge that follows this board it will not take long to be back where we were in terms of info. I value everyones input from a beginner that has no idea of what a flowbench even is to the person who is using one everyday. We all can learn from each other! I know for myself I've learned an awful lot from others here.
- 98-1074649673
by 84-1074663779 » Wed Jan 21, 2004 7:15 pm
If all the old stuff could just be lumped together as a read only archive, that can just be scrolled through or printed out as it is. That would probably be quite sufficient.
Hey guys, if you log in, it opens a few extra features. I really like getting an e-mail as soon as a new post appears. Saves me having to check the Forum all the time.
Hey guys, if you log in, it opens a few extra features. I really like getting an e-mail as soon as a new post appears. Saves me having to check the Forum all the time.
- 84-1074663779
- guest
by lou » Tue Jan 27, 2004 10:01 pm
Hi.
I designed my own flow bench. I used a LEaf blower (Toro model) that I bult a DC speed control for. I used a PIC processor to control the motor speed, and I measure mass airflow, and pressure, and I have 2 "extra" analog inputs. I wrote a Visual Basic front end, and now I have a PC controlled flow bench that graphs pressure veruses cfm, and voltage vs cfm. I used this bench to calibrate air intakes that I make.
The only problems I have is that the leaf blower can only move about 200 CFM at 10".. I need to use a supercharger or something bigger to move more air..
Email me if you are interested.
lou@faustini.com
I designed my own flow bench. I used a LEaf blower (Toro model) that I bult a DC speed control for. I used a PIC processor to control the motor speed, and I measure mass airflow, and pressure, and I have 2 "extra" analog inputs. I wrote a Visual Basic front end, and now I have a PC controlled flow bench that graphs pressure veruses cfm, and voltage vs cfm. I used this bench to calibrate air intakes that I make.
The only problems I have is that the leaf blower can only move about 200 CFM at 10".. I need to use a supercharger or something bigger to move more air..
Email me if you are interested.
lou@faustini.com
- lou
by 84-1074663779 » Tue Jan 27, 2004 11:18 pm
You are quite right Lou. I think every one of us has gone through the leaf blower stage. I ended up burning out a brand new one pretty quickly, with too much restriction and not enough airflow to cool the motor.
The blower is really the biggest limitation of what you finally end up with, so spend some time testing various bare blowers before you build the main flowbench enclosure. There are lots of ways of doing it, available electrical power is what finally restricts most of us. Shifting air at decent pressure requires a lot of horsepower and amps.
The most popular solution is lots of vacuum cleaner motors, but I am not sure this is the best way to go about it. I use a large single centrifugal forge blower, pulley driven from a three phase motor. It runs at quite high speed to develop sufficient flow and pressure. A supercharger would also work very well, but is expensive unless you happen to already have something suitable.
The blower is really the biggest limitation of what you finally end up with, so spend some time testing various bare blowers before you build the main flowbench enclosure. There are lots of ways of doing it, available electrical power is what finally restricts most of us. Shifting air at decent pressure requires a lot of horsepower and amps.
The most popular solution is lots of vacuum cleaner motors, but I am not sure this is the best way to go about it. I use a large single centrifugal forge blower, pulley driven from a three phase motor. It runs at quite high speed to develop sufficient flow and pressure. A supercharger would also work very well, but is expensive unless you happen to already have something suitable.
- 84-1074663779
by Engine Equipment » Fri Jan 30, 2004 12:54 pm
- Engine Equipment
- Posts: 1
- Joined: Fri Jan 30, 2004 11:20 am
- Location: Iowa
10 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 17 guests