Posted: Tue Apr 11, 2006 4:12 pmOrdered this from Dwyer recently. Price was right. Custom bend cost 25$ more.
Tractorsport Flowbench Forum Archive
Archived Flow Bench Forum
http://tractorsport.com/forum/
Dwyer Pitot - Dwyer Pitot
Page 1 of 1
Posted: Tue Apr 11, 2006 4:12 pmPosted: Wed Apr 12, 2006 7:52 pmWhat is the dimension across the "U" bend? The one I use is .850" with .125" tubing. Audie makes a 3/32" tube pitot, but I don't know the cross dimension. Can't remember if mine is from SF, Perf Trends or Dwyer.
Posted: Thu Apr 13, 2006 11:04 pmI'll measure it tommorow and post. Seem like it's 23mm if I recall correctly....I'll double check. There are areas I can't get to in some ports. I could use something less than .5" for certain heads..
Larry C
Larry C