Tractorsport Flowbench Forum Archive

Posted: **Tue Aug 10, 2004 8:01 pm**

Looking for low pressure (0 - 5" HG) pressure transducers that have a 0-5 volt output... Actually something that will read both negative and positive pressures (such as -5 to 0 to +5)would be great, but I don't want to be picky ;-)

. Looking to measure airbox pressures and for general dyno testing purposes (bowl pressure, etc) which can be either positive or negative. Thanks in advance, D

Posted: **Tue Aug 10, 2004 10:18 pm**

Check this site I've go a Setra part# 2641005WB2DT1C. It's a differential pressure sensor +/- 5.0 WC with 0-5 VDC output. I picked it up off of ebay for $20.00

Posted: **Wed Aug 11, 2004 11:12 am**

Great tip, I will look into that. I did mean +-5" HG, not H2O, but they probably make one to suit my range as well. D

Tractorsport Flowbench Forum Archive

Low pressure transducer source?