Hi Guys,
I received a new toy from John at Flow Performance. It a RBV valve. Along with the FP1, standard version, the RBV will adjust depression for you! You can enter the desired settings and the FP1 and RBV takes care of the rest! It's the coolest item I've received! After the FP1 that is.
Basically it gets plumbed into the section of the bowls. I used 4" PCV pipe. The unit then connents via a cable to the FP1. You set the settings at depression and turn on all the motors. The FP1 talks to the RBV and opens and closes to acheive the desired depression! WAY COOL!! Some of the things I've found while playing with the unit..
*Turn all the motors on! Saves on start-up
*Open your intake/fuel bowl all the way up, NO MORE ADJUSTING!!!
*Run your valve down and watch the RBV find your depression
*You can set the RBV and 10", 15" 28" even 36
I'm impressed with this unit. If anyone has any specific questions, post or email. Along with the FP1 and RBV, flowing has become faster, easier, and more accurate. John, thanks again for the great product and great service..
Chad