Posted:
Sun Jan 09, 2005 11:38 pmby mulemotors
I was wondering what effect the ID size of the pvc has on the flow bench. I understand it changes cubic feet measurement, but what else? Also what advantage is there to having long strait runs of pipe, and is there an ideal length.
Thanks
Posted:
Mon Jan 10, 2005 12:13 amby RRBD
If you go and read through the old posts, you'll get most of your questions answered.Dont' sweat it, I need to be reminded to look back through the old stuff sometimes as well.......Its all dependant on what ranges(cfm/depression) you want to test at, as to what diameter your flow element needs to be. Briggs=smaller, Big Block Chev=larger
Scott