Tractorsport Flowbench Forum Archive

Posted: **Tue May 05, 2009 8:34 am**

How much valve lift so you guys using Bruce & Rick's FlowSoft setup want to see?

I'm about to get going on the Excel app. for those units and want to build it to suit the users.

Screen real estate is always something to contend with. So, with that said, if valve lifts are in the .600" max range, then it leaves me room to make the display numbers larger.....just something to think about.

Larry C

Posted: **Tue May 05, 2009 4:46 pm**

Larry,
Personally, I have only needed to go over .800" once. I do quite a few that push .800" lift. Now guys doing a lot of Pro Stock heads are doing over 1.00" now.

John

Posted: **Tue May 05, 2009 10:50 pm**

i usually only require .800 on my stuff also. .850 tops but not necessary.

max

excited to see this

Posted: **Wed May 06, 2009 7:07 pm**

I think this is a good question As Larry states no matter Excel or Flowsoft Screen space for most is at a premium! The other thing to consider is the lift point as this also a common variable. .050? .100? ???

This all helps me with futer upgrades to FlowSoft.

Rick

Posted: **Tue May 12, 2009 11:21 am**

Tractorsport Flowbench Forum Archive

Excel for FlowSoft Systems - How much valve lift do you want to see