The only thing I've done to it so far is gasket matching the upper and lower intake manifolds (well, still in progress). I've wanted to get into porting for a long time, and I had to tear it apart to replace the intake manifold gaskets, so I figured while it was apart, I'd give it a shot. Eventually, my plans are to make a small flowbench, find an extra set of heads, intake manifolds, and throttle body, and see what I can get out of it. Once I get my current manifolds ready to re-install, I'll post pics so maybe you guys can give me some pointers. Just please remember this is my very first time trying to port.
