For a presentation i want to make a 3D model of a flowbench so i can visualise how it works. Currently i am busy shaping the bench in SolidWorks, but i ask myself (laisy as i am) maybe someone has done this before or knows how to get some drawings.
This is how far i got so far:
[imgatt]
3D Drawings
4 posts
• Page 1 of 1
by arnotoekan » Wed Mar 15, 2006 6:14 am
- arnotoekan
- Posts: 5
- Joined: Thu Feb 23, 2006 6:02 am
- Location: Netherlands
by gofaster » Wed Mar 15, 2006 8:02 pm
You're missing a panel to hold the orifice opening(s). Most guys building this style bench also add an extra panel above the orifice plate to help the flow to settle and reduce turbulence within the bench. If you search the archives you will find a lot of discussion on the idea, and several very good pictures and drawings.
Jim
- gofaster
- Posts: 237
- Joined: Fri Jul 01, 2005 6:39 pm
- Location: Indiana
by arnotoekan » Thu Mar 16, 2006 5:00 am
that is why i wrote: this is how far i got ... :;):
but i will check the archive for usefull drawings, thanx
but i will check the archive for usefull drawings, thanx
- arnotoekan
- Posts: 5
- Joined: Thu Feb 23, 2006 6:02 am
- Location: Netherlands
4 posts
• Page 1 of 1
Return to Orifice Style bench discussion
Who is online
Users browsing this forum: No registered users and 21 guests