Page 1 of 1
Posted:
Tue Oct 18, 2005 4:57 pmby rbracer
Hi,
I am new to this, can any one tell me how to do temperature correction on a bench that is a blower center type, the bench I have is like a sf110 only bigger.
Rick
Posted:
Tue Oct 18, 2005 7:45 pmby Unkl Ian
To start,you'll need two temperature readings.
One before,and one after,the motors.
As the motors heat up,it does make a difference.
Posted:
Wed Oct 19, 2005 2:23 amby rbracer
The bench has two temp gauges, what I was looking for is how to correct the CFM readings using the two temperatures.
Rick
Posted:
Wed Oct 19, 2005 3:17 pmby Unkl Ian
The formula is is the Superflow manual.
Maybe someone here has a copy,since I can't find mine.
Simple to use,just a little time consuming.
Posted:
Wed Oct 19, 2005 4:19 pmby larrycavan
Here's the chart
Posted:
Thu Oct 20, 2005 4:38 pmby rbracer
Thanks that is what I was looking for.
Rick