Page 1 of 1
Posted:
Wed Mar 15, 2006 6:14 amby arnotoekan
For a presentation i want to make a 3D model of a flowbench so i can visualise how it works. Currently i am busy shaping the bench in SolidWorks, but i ask myself (laisy as i am) maybe someone has done this before or knows how to get some drawings.
This is how far i got so far:
[imgatt]
Posted:
Wed Mar 15, 2006 6:14 amby arnotoekan
[imgatt]
Posted:
Wed Mar 15, 2006 8:02 pmby gofaster
You're missing a panel to hold the orifice opening(s). Most guys building this style bench also add an extra panel above the orifice plate to help the flow to settle and reduce turbulence within the bench. If you search the archives you will find a lot of discussion on the idea, and several very good pictures and drawings.
Posted:
Thu Mar 16, 2006 5:00 amby arnotoekan
that is why i wrote: this is how far i got ... :;):
but i will check the archive for usefull drawings, thanx