Page 1 of 1
Posted:
Wed Nov 29, 2006 5:59 pmby ddelzel
[color=#000000]I did an AutoCad drawing of an inclined manometer scale and I thought I would post it in case any one else needs one. I printed the drawing at 100% on ANSI D size paper. The scale is 29" long. I used a piece of 1/8" by 1 1/2" extruded aluminum from a local hardware store to mount it on. I got some carpet tape at Mennard
Posted:
Wed Nov 29, 2006 9:29 pmby larrycavan
Hey...that was a pretty cool thing to do! 
Posted:
Thu Nov 30, 2006 10:23 amby ddelzel
Has anyone tried to download the attachment? I tried it as a test and AutoCad gave me an error messsage that it was an "invalid file"? Let me know and I will try again.
Posted:
Thu Nov 30, 2006 3:16 pmby bruce
I don't have autocad to try it out but if there is a problem with uploading it I can host it on the site if need be. Plenty of storage space, that goes with anything anyone wants to post and can't host it.
Posted:
Thu Nov 30, 2006 3:44 pmby ddelzel
I was going to PM you and attach the file but didn't see an option for attchments.
Posted:
Thu Nov 30, 2006 6:59 pmby bruce
Here is a link to the hosted file: