Tractorsport Flowbench Forum Archive

Posted: **Fri Sep 29, 2006 7:07 am**

Hello, I come from bought a tool to make machinings 3 angles on the valve seat at goodson you already made tests on flow bench for controlled the effectiveness to different 3 angles profiles goodson sell many cutter blade with different profiles which it is the best choice among all the cutter blade

R.C

Posted: **Fri Sep 29, 2006 4:37 pm**

RC, it depends on the particular application. I think goodson sells a set of performance cutters which includes some very nice profiles, it's a good start anyway.

Tractorsport Flowbench Forum Archive

flowbench and valve job