Sorry for the PM Tom. Plates arrived yesterday (good old USPS) I will test today and send them out tomorrow. Looks like gofast is the closest.
Art
Edited By bruce on 1140721788
Plates - Where are those little buggers?
by hollywood63 » Thu Feb 23, 2006 8:11 am
- hollywood63
- Posts: 59
- Joined: Mon Nov 15, 2004 10:25 pm
- Location: U.P of Michigan
by bruce » Thu Feb 23, 2006 3:09 pm
Agree on the priority mail the plates will fit into the VCR tape box they have at the post office, should be less than $4.00 to send them to the next person.
"There is no more formidable adversary than one who perceives he has nothing to lose." - Gen. George S. Patton
- bruce
- Site Admin
- Posts: 1638
- Joined: Sun May 09, 2004 12:17 pm
by Mousehouse1 » Tue Mar 14, 2006 1:28 pm
I sent the plates off to the next person on the list. I wasn't able to flow them because my bench is messing up. When the last person flows them on the west coast can you send them back to me. I should have my bench fixed by then.
- Mousehouse1
- Posts: 210
- Joined: Tue Jul 12, 2005 4:27 pm
- Location: Oklahoma City
by Rick360 » Sat Mar 18, 2006 4:05 pm
I got the plates yesterday and am flowing them today. I will send them off on Monday if I can get confirmation on who to send to.
The order on the list is a little outta whack. Some people on the list have no markings by their name yet are before me. They've already been East, North, West and South of me. Where to next?
It appears that CFM Headman (Dave) would be next. Dave are you ready? Have you had them yet? You are before me on the list but no indication you've had them yet, so I am assuming you haven't?
If Dave has already had them or isn't ready Mouse would be next. I will need address info if Dave is not ready. Nick is after mouse.
Some names may not be on the list who posted. I don't see maxracesoftware on the list. Any others?
Bill (Blown928) I changed your "not ready" to "ready" on the list so they can come to you on the way back to bruce.
let me know who is ready or if your status has changed so the list can be updated.
PM me or email me at rferbert(at)stjoelive(dot)com
Rick
The order on the list is a little outta whack. Some people on the list have no markings by their name yet are before me. They've already been East, North, West and South of me. Where to next?
It appears that CFM Headman (Dave) would be next. Dave are you ready? Have you had them yet? You are before me on the list but no indication you've had them yet, so I am assuming you haven't?
If Dave has already had them or isn't ready Mouse would be next. I will need address info if Dave is not ready. Nick is after mouse.
Some names may not be on the list who posted. I don't see maxracesoftware on the list. Any others?
Bill (Blown928) I changed your "not ready" to "ready" on the list so they can come to you on the way back to bruce.
let me know who is ready or if your status has changed so the list can be updated.
PM me or email me at rferbert(at)stjoelive(dot)com
Rick
- Rick360
- Posts: 58
- Joined: Tue Dec 14, 2004 8:41 pm
- Location: MO
by larrycavan » Sat Mar 18, 2006 7:23 pm
If I recall, Larry Meaux is in your neighborhood..so to speak..I know he's ready....question is...does he have time right now..
- larrycavan
- Site Admin
- Posts: 1183
- Joined: Fri Apr 01, 2005 4:40 pm
by maxracesoftware » Sun Mar 19, 2006 5:42 am
- maxracesoftware
- Posts: 132
- Joined: Fri Mar 26, 2004 7:54 pm
by Thomas Vaught » Sun Mar 19, 2006 12:26 pm
Larry,
Once you get the plates in the shipping envelope you will find a couple of sets of shipping labels.
One of the shipping labels would normally be missing. That will be the one with your name on it and your address. That label was used to get the plates to you. When the two lists were created there were enough labels printed to get the plates to you and to use the second label as a return address when you sent the plates to the next person.
The plates were supposed to be sent to the CLOSEST person to you on the list to save on shipping costs. It did not work out that way.
Hope this helps.
Tom V.
Once you get the plates in the shipping envelope you will find a couple of sets of shipping labels.
One of the shipping labels would normally be missing. That will be the one with your name on it and your address. That label was used to get the plates to you. When the two lists were created there were enough labels printed to get the plates to you and to use the second label as a return address when you sent the plates to the next person.
The plates were supposed to be sent to the CLOSEST person to you on the list to save on shipping costs. It did not work out that way.
Hope this helps.
Tom V.
- Thomas Vaught
- Posts: 465
- Joined: Fri Feb 18, 2005 5:36 pm
- Location: Michigan
by bruce » Sun Mar 19, 2006 3:26 pm
I must say I am impressed with how well this project has actually progressed! Take a bunch of people who don't really know each other, send a bunch of plates around and have it goes as smoothly as it has so far.
It was not setup as "formal" as it probably should have been for the undertaking it has become (Thanks Larry for all you did for me in helping setup what we are doing!!!!) Larry deserves the THANKS! It was kinda a spur of the moment idea that has blossomed into what we are now doing
I'm going to let this little bit of info slip out (cause you are all dying to know) that you all are going to be amazed at how well your projects work!
And for those of you who flowed the plates and did not send me your results yet . . . get them to me so I don't forget you on the list!
It was not setup as "formal" as it probably should have been for the undertaking it has become (Thanks Larry for all you did for me in helping setup what we are doing!!!!) Larry deserves the THANKS! It was kinda a spur of the moment idea that has blossomed into what we are now doing
I'm going to let this little bit of info slip out (cause you are all dying to know) that you all are going to be amazed at how well your projects work!
And for those of you who flowed the plates and did not send me your results yet . . . get them to me so I don't forget you on the list!
"There is no more formidable adversary than one who perceives he has nothing to lose." - Gen. George S. Patton
- bruce
- Site Admin
- Posts: 1638
- Joined: Sun May 09, 2004 12:17 pm
by PFM » Mon Mar 20, 2006 2:02 am
Bruce,
I think that is a great little slip on the info. And yes this is a great project. In a perfect world all of the benches would be within a small percentage of the "correct" numbers. I have never thought that bench to bench to bench that numbers would be comparable.
Yes I took the Super Flow tour, talked with Harold Bettes (nice guy) an know all their benches are calibrated to the same plates etc. But there is operator error, flow com calibration error, etc. that all cause troubles. If this very wide variety of benches are close it would be great.
Stay tuned the results should be awesome.
PFM
I think that is a great little slip on the info. And yes this is a great project. In a perfect world all of the benches would be within a small percentage of the "correct" numbers. I have never thought that bench to bench to bench that numbers would be comparable.
Yes I took the Super Flow tour, talked with Harold Bettes (nice guy) an know all their benches are calibrated to the same plates etc. But there is operator error, flow com calibration error, etc. that all cause troubles. If this very wide variety of benches are close it would be great.
Stay tuned the results should be awesome.
PFM
- PFM
- Posts: 26
- Joined: Thu Jul 29, 2004 2:55 am
Who is online
Users browsing this forum: No registered users and 4 guests